H3C Technologies H3C S5800 Series Switches - Manual (Page 12)

8
Gas Limit (mg/m 3 )
NH
3
0.05
Cl
2
0.01
Installing the RPS unit
The RPS800-A can be installed either in a 19-inch standard rack or
directly on a tabletop.
Installing the RPS unit to a 19-inch rack
Follow these steps to install the RPS unit to a 19-inch rack:
Step1 Put on an ESD-preventive wrist strap and check the grounding
and stableness of the rack.
Step2 Attach a mounting bracket to the front end of the RPS unit by
using screws, as shown in
Figure 3 . Attach the other mounting
bracket in the same way.
Figure 3 Install the RPS unit to a 19-inch rack (I)