H3C Technologies H3C S5800 Series Switches - Manual (Page 4)

4
Cable type Code
Type of output
interface (in
direction A)
Type of output
interface (in
direction B)
Cable
length
Maximum
output current
JD5-A JD5
2 m (6.56
ft.)
25 A
CAB-RPS Non
PoE-2m -JD5
0404A055
JD5 JD5-A
2 m (6.56
ft.)
8 A
NOTE:
•
A connector of direction A connects to the DC input socket of the switch, and a connector of direction B
connects to the DC output interface of the RPS unit.
• A JD5-A connector looks like a JD5 expect that a JD5 is a little bigger. Figure 1 depicts the appearance
of H2*7 and JD5 connectors.
• To use the PSR750-D for the H3C S5800-60C-PWR, you also need to select the
RPS1000-A3/RPS1600-A to provide DC power supply, and use the cable with code 0404A0A1, which
is shipped with the PSR750-D. For relevant information, see H3C PSR750-A&PSR750-D Power Modules
User Manual.
Ordering Information for RPS Units and Power
Cables
Ordering Information for RPS800-A
Table 4 Support matrix between the RPS800-A, switch and DC power cables
Applicable switches Applicable DC inputs Cables
S3100 series S3100-26TP-EI-W RPS DC interface 0404A03C
S3600 series
• S3600-28P-EI
• S3600-52P-EI
• S3600-28F-EI
– 48 VDC through –60
VDC interface
0404A03V
S3600V2 series
• S3600V2-28TP-EI
• S3600V2-52TP-EI
• S3600V2-28F-EI
– 48 VDC through –60
VDC interface
0404A03V
• S3610-52M
• S3610-52M-DC
RPS DC interface 0404A033
S3610 series
• S3610-28P
• S3610-28TP
• S3610-28F
• S3610-52P
– 48 VDC through –60
VDC interface
0404A03V
S5100 series
• S5100-26C-EI
• S5100-50C-EI
• S5100-24P-EI
• S5100-48P-EI
– 48 VDC through –60
VDC interface
0404A03V