H3C Technologies H3C S5800 Series Switches - Manual (Page 23)

18
Table 6 Optional cables for SFP+ transceiver modules
SFP+ cable Cable length Description
LSWM1STK 0.65 m (2.13 ft)
• The S5800 and S5820X
series switches support the
Intelligent Resilient
Framework (IRF) feature,
where physical connections
are required among
members. You can use SFP+
cables to connect the SFP+
ports.
• SFP+ cables are applicable
to SFP+ ports of the
LSW1SP4P0 or
LSW1SP2P0.
• SFP+ cables are hot
swappable.
LSWM2STK 1.2 m (3.94 ft)
LSWM3STK 3 m (9.84 ft)
LSTM1STK 5 m (16.40 ft)
LSWM4STK 10 m (32.81 ft)
NOTE:
•
Before installing or removing a cable, wear an ESD-preventive
wrist strap and make sure that the strap is in good skin contact
and is properly grounded.
• Horizontally insert the cable connector into the SFP+ port of the
switch.
• To unplug the cable connector from the port, hold the cable
connector and pull the handle at the end of the connector.