beautypg.com

Configuring the csnp packet sending interval, Configuring the maximum lsp lifetime, Maximum number of lsps sent at each interval – H3C Technologies H3C S12500-X Series Switches User Manual

Page 21

background image

15

Configuring the CSNP packet sending interval

This configuration takes effect only on DEDs.
The DEDs in an EVI network regularly send CSNP packets to advertise LSP summaries for LSDB
synchronization.
To configure the CSNP packet sending interval on a DED:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enter tunnel interface view.

interface tunnel number
[ mode evi ]

N/A

3.

Configure the CSNP packet
sending interval.

evi isis timer csnp seconds

By default, a DED sends CSNP
packets every 10 seconds.

Configuring the minimum LSP sending interval and the maximum number of LSPs sent at each interval

When MAC reachability information changes, an edge device sends LSP updates to notify its adjacent

EVI neighbors.
To control EVI IS-IS LSP traffic on the EVI network:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enter EVI tunnel interface view.

interface tunnel number
[ mode evi ]

N/A

3.

Configure the minimum LSP
sending interval and the maximum

number of LSP segments sent at
each interval.

evi isis timer lsp time [ count
count ]

By default, the minimum LSP
sending interval is 100

milliseconds, and a maximum of

five LSP segments can be sent at
each interval.
Before the minimum sending
interval is reached, the EVI tunnel

interface cannot send LSP segments.

Configuring the maximum LSP lifetime

EVI edge devices add a lifetime in each LSP they have advertised, and update LSPs regularly or when
MAC reachability information changes. If an edge device does not receive an update for an LSP before

the lifetime expires, the edge device removes the LSP from the LSDB and removes the MAC addresses

advertised through the LSP from the data plane.
To specify the maximum lifetime of the LSPs generated by an EVI IS-IS process:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enter EVI IS-IS process view.

evi-isis process-id

N/A

3.

Configure the maximum LSP

lifetime.

timer lsp-max-age seconds

The default maximum LSP lifetime is
1200 seconds.

This manual is related to the following products: