H3C Technologies H3C S12500 Series Switches - Manual (Page 24)

17
a. Select System Management > Network Management > Segment Configuration from the
navigation tree.
Figure 8 Adding segment 10
b. Select 10 from the Segment No. list.
c. Select inbound from the Internal Zone list.
d. Select outbound from the External Zone list.
e. Click Apply.
# Configure the collaboration policy and rules:
f. Select System Management > Network Management > ACFP Policy from the navigation tree,
and click Create Policy to enter the page for creating a policy.
Figure 9 Configuring collaboration policy
b. Enter the description t1.
c. Select GigabitEthernet5/0/23 from the Source Interface list.
d. Select the Enable option.
e. Select 0 from the Priority list.
# Add rule 1:
a. On the Configure Rule tab as shown in Figure 9 , click Add.
Figure 10 Creating rule 1