Acfp usage guidelines – H3C Technologies H3C S12500 Series Switches User Manual
Page 16
9
•
ClientID—ACFP client identifier.
•
Policy index
•
Rule index—rule identifier.
•
Status—It indicates whether the rule is applied successfully.
•
Action—It can be mirror, redirect, deny, permit, or rate.
•
Match all packets—It indicates whether to match all the packets. If yes, the following matching
needs not be performed.
•
Source MAC address
•
Destination MAC address
•
Starting VLAN ID
•
Ending VLAN ID
•
Protocol number in IP
•
Source IP address
•
Wildcard mask of source IP address
•
Source port operator—Its type can be equal to, not equal to, greater than, less than, greater than
and less than. The following ending source port number takes effect only when the type is greater
than and less than. The source port number of the packets matched by the identifier must be greater
than the starting source port number and less than the ending source port number.
•
Starting source port number
•
Ending source port number
•
Destination IP address
•
Wildcard mask of destination IP address
•
Destination port number operator—Its type can be equal to, not equal to, greater than, less than,
greater than and less than. The following ending destination port number is meaning only when
the type is greater than and less than. The destination port number of the packets matched by the
identifier must be greater than the starting destination port number and less than the ending
destination port number.
•
Starting destination port number
•
Ending destination port number
•
Pro—Protocol type, which can be GRE, ICMP, IGMP, OSPF, TCP, UDP, and IP.
•
IP precedence—Packet precedence, a number in the range of 0 to 7.
•
IP ToS—ToS of IP.
•
IP DSCP—DSCP of IP.
•
TCP flag—It indicates that some bits in the six flag bits (URG, ACK, PSH, RST, SYN, FIN) are
concerned.
•
IP fragment—It indicates whether the packet is an IP packet fragment.
•
Rate limit
You can use the collaboration policy to manage the collaboration rules that belong to it.
ACFP usage guidelines
When you configure ACFP, follow these guidelines: