H3C Technologies H3C S12500 Series Switches - Manual (Page 22)

15
Figure 4 Web login interface
# Configure the ACFP client:
a. Select System Management > Network Management > ACFP Client Configuration from the
navigation tree.
Figure 5 Configuring the ACFP client
b. Select Enable ACFP Client.
c. Select the SNMP version SNMPv3.
d. Enter the server security username v3user_no.
e. Enter the server IP address 40.94.1.1.
f. Enter the client IP address 40.94.1.2.
g. Enter the mask 24.
h. Enter the VLAN ID 4094.
i. Click Apply.
j. Click Connectivity Test to perform a connectivity test.
# Add security zone inbound:
a. Select System Management > Network Management > Security Zone from the navigation tree,
and click << to enter the page for adding a security zone.