Ensemble Designs BrightEye 70 HD/SD AES Embedder/Disembedder - Manual (Page 10)

BrightEye 70 HD/SD AES Embedder/Disembedder
Input Menu
The appearance of the Input menu will depend on the mode of the module and
the type of audio being used.
Multiplexer Mode
When the module is set for Mux, the Input menu provides the controls
shown below:
• Group A Status – the status of the .audio selected in
Group A Select will be displayed as Off, No Audio Present,
Group1 OK, Group 2 OK, Group 3 OK, and Group 4 OK.
• Group B Status – the status of the .audio selected in
Group B Select will be displayed as Off, No Audio Present,
Group1 OK, Group 2 OK, Group 3 OK, and Group 4 OK.
• Group A Select – select the audio group to mulitplex from Group 1,
Group 2, Group 3, Group 4, or Off for either control.
• Group B Select – select the audio group to mulitplex from Group 1,
Group 2, Group 3, Group 4, or Off for either control.
• AES 1/2, 3/4, 5/6, 7/8 Status – for Mux mode, the AES inputs will
report the audio type being input to the AES BNCs as No Input,
Sync Audio, Async Audio, Sync Data, or Async Data
BrightEye-10