Ensemble Designs BrightEye 20 Analog and Digital Audio Embedder or Disembedder - Manual (Page 9)

TM BrightEye 20
• AES 1/2 and AES 3/4 Status – these controls indicate the status/behavior
of the AES I/O connections. They show: No Input, Audio Present, Data
Present, or Output Mode.
• Dig Ref Level – selects the digital reference level. This pulldown lets you
choose between: -20 dBFS or -18 dBFS.
• Peak Indicator – selects the amount of headroom to use in determining
peak levels. This pulldown lets you chose between: Clipping, 2 dB
Headroom, 4 dB Headroom, 6 dB Headroom, 8 dB Headroom, or 10
dB Headroom.
• Anlg Out Level – selects analog output reference level. This pulldown lets
you chose between: -10 dBu or +4 dBu.
• Strip Audio – when On, all audio and EDH is stripped from the incoming
stream. Off leaves audio and EDH as it comes in on the input signal.
BrightEye-9