Ensemble Designs 6020 Four Channel 24-bit Audio DAC - Manual (Page 4)

In the application shown below, a 6020 module is used to convert two AES audio outputs
of a digital VTR to analog in order to feed an analog audio routing switcher.
The 6020 has balanced transformerless outputs. This application shows how to drive
external equipment with single-ended (unbalanced) inputs. Note that the minus (-) side of
the balanced output stage is left floating; it should not be connected to ground. In addition
to its four balanced line level outputs, the 6020 has four unbalanced outputs. These
outputs, available on BNC connectors, are suitable for driving monitor amplifiers or other
similar equipment as shown in the first application on the preceding page.
Model 6020 Four Channel 20-bit Audio DAC
6020-4
DIGITAL VTR
6020 AUDIO DAC
ANALOG AUDIO
TO FACILITY
ROUTING
SIWTHCER
CH 1
CH 2
CH 3
CH 4
AES OUT CH 1/2
AUDIO OUTPUTS
AES OUT CH 3/4
6020 Converting Digital VTR Outputs to Feed Analog Routing Switcher
6020 AUDIO DAC
ANALOG AUDIO
DESTINATION
GND
GND SHIELDED CABLE
_
+
BALANCED
AUDIO OUTPUT
(1 OF 4) UNBALANCED AUDIO INPUT
UNBALANCED AUDIO INPUT
6020 AUDIO DAC
ANALOG AUDIO
DESTINATION
GND
GND SHIELDED CABLE
UNBALANCED
AUDIO OUTPUT
(1 OF 4)
6020 Driving Single-Ended Inputs