Ensemble Designs 6020 Four Channel 24-bit Audio DAC - Manual (Page 21)

In the 1/2 Stat Menu shown below, the following indicators and error logs are available
for Channels 1 and 2:
• I/P AES - displays information about the input AES signal that is decoded from
the channel status information as follows:
Blank - Professional format with CRC errors.
Pro Audio - Professional format where stream contains audio data.
Pro non-audio - Professional format where stream contains non-audio data.
Cons audio - Consumer format where stream contains non-copyright audio data.
Cons non-audio - Consumer format where stream contains non-audio data.
Cons copy OK - Consumer format where stream contains original copyright
material that may be copied once.
Cons copy inh - Consumer format where stream contains a copy of copyright
material that may not be copied again.
• Sampling Freq - displays the sampling frequency of the input signal pair. The
following sampling frequencies will be displayed:
48kHz
44.1kHz
44.056kHz
32kHz
Non-standard indicates the sampling frequency is not within 4% of any of the
above frequencies.
• Error - will indicate the presence of errors on the input signal pair as follows:
Red indicates minor errors exist on the input signal pair and have been logged.
Red/Gray (Blink) indicates major errors exist on the input signal pair and
have been logged.
Black indicates no errors exist on the input signal pair.
6020-21
Model 6020 Four Channel 20-bit Audio DAC