Ensemble Designs 5360 Four Channel Analog to Digital Video Converters and Embedders User Manual
Page 18
Models 5360 and 5365 Four Channel Analog to Digital Video Converters and Embedders
Repeat the configuration for each of the four input channels with their respective Config
menus.
The Proc 2 menu shown below gives an example of the adjustable video processing
parameters for each channel in their respective Proc 1 – 4 menus:
•
Gain – adjust the percentage of overall gain (luminance and chrominance).
Available value range: 0 – 150%.
•
Chroma – adjust the percentage of chroma amplitude. Available value range:
0 – 150%.
•
Pedestal – adjust the pedestal (black) level of the signal in IRE. Available value
range: -30 – 30 IRE.
•
Hue – adjust the hue of the signal ± 180 degrees.
Use the TBC 1 – 4 menus as shown in the example on the next page for Channel 1 to
turn the time base corrector/frame sync function on and off, then adjust horizontal and
vertical timing independently for each of the four channels with their respective TBC
menus:
•
TBC/FrameSync – turn TBC and Frame Sync functionality On or Off. The TBC
Status window next to the control will indicate what the channel is locked to.
•
Hor Time – adjust the horizontal timing of the channel in clocks.
•
Ver Time – adjust the vertical timing of the channel in lines.
NOTE: The TBC menus are for model 5360 only. The 5365 does not have the TBC (time
base corrector) functionality.
5360-18