Ensemble Designs 5360 Four Channel Analog to Digital Video Converters and Embedders User Manual
Page 17
Avenue Touch Screen Remote Configuration
The Avenue Touch Screen remote control menus for this module are illustrated and
explained below. Refer to the 5360 and 5365 Parameter Tables for a summary of
available parameters that can be set remotely through the menus illustrated.
Parameter fields that are grayed out can indicate one of the following conditions:
•
An option is not installed.
•
The function is not active.
•
The module is locked.
•
The User Level set with Avenue PC is not accessible from the current User Level.
5360 Touch Screen Menus
The Config 1 menu example shown below shows the configuration parameters available
for each individual channel 1 – 4 in their respective Config menus.
•
Blanking – use this control to set the blanking for the channel as Narrow (lines
1-9 are blanked in NTSC, lines 1-6 in PAL) or Wide (lines 1-20 in NTSC, lines 1-22
in PAL).
•
Setup Removal – use this control to turn setup removal On or Off depending on
the requirement of the input signal.
•
Signal Mute – set the action of the output when the input signal is lost. Available
values are No Muting, Mutes on Noise, Freeze on Noise.
•
Test Pattern – turn a Color Bars test pattern on or off. Available values are Off,
Bars, Black.
•
Comb Mode – set the comb mode for 3 Line (best for video with motion) or
5 Line decoding.
Status reporting is provided for the following conditions:
•
Input – reports the input status as No Input, 525 Lock, or 625 Lock.
5360-17
Models 5360 and 5365 Four Channel Analog to Digital Video Converters and Embedders