Ensemble Designs 7465 Sync Changeover Switch - Manual (Page 28)

www.ensembledesigns.com
Page 28
7465 Sync Changeover Switch and 9465 3G Sync Changeover Switch
9465 Specifications
Input Signals
Number Six
Signal Type HD Serial Digital 2.97 Gb/s
SMPTE 424M, 425M
HD Serial Digital 1.485 Gb/s
SMPTE 274M, 292M or 296M
SD Serial Digital 270 Mb/s
SMPTE 259M,
Analog Composite,
AES Digital Audio, LTC,
Bi-Level Sync or Tri-Level Sync, selectable
Impedance 75 Ω
Return Loss >15 dB DC to 1.485 Gb/s
Automatic Cable Input Equalization
HD Standards Supported
1080i (SMPTE 274M -4, 5, 6) 50, 59.94 or 60 Hz
720p (SMPTE 296M -1, 2, 3) 50, 59.94 or 60 Hz
1080p (SMPTE 274M -9, 10, 11) 23.98, 24, 25 Hz
1080sF (RP211 -14, 15, 16) 23.98, 24, 25 Hz
Output Signals
Number Three
Signal Type
Follows input
Impedance 75 Ω
Return Loss >15 dB DC to 270 MHz
Switcher Characteristics
Type 75 Ω RF Relay
Insertion Loss <0.5 dB
General Specifications
Connectors BNC
Power Consumption
<7.0 watts
Temperature Range 0 to 40°C ambient (all specs met)
Relative Humidity 0 to 95% noncondensing
Altitude 0 to 10,000 ft
Fusing 1.5 Amp PTC resettable fuse
9465 module cannot be installed in slot 3 of a 1RU frame when 5035 System Control module is installed.