Ensemble Designs 7465 Sync Changeover Switch - Manual (Page 17)

www.ensembledesigns.com
Page 17
7465 Sync Changeover Switch and 9465 3G Sync Changeover Switch
7465 and 9465 Avenue PC Menus
Status Menu
The Status menu screen shown below displays overall status of the Primary and Secondary channels,
including the ganged channels (if present and enabled). Status indicators for each channel will light as
follows: Green = Good, Red = Faulted, Gray = Not enabled. In addition, the text fields along the right
side, Pri Status and Sec Status, indicate the channel status (Good or Failed). The Switch Pos text field
indicates Primary or Secondary to reflect which input is feeding the output. Auto Reset and Reset Time
controls for the switching function are also set with this menu.
• Pri Status – Shows the status of the Primary A, B and C channels and the ganged channel (if
present and enabled in the Gang menu). The OK indicator will report a failure when any one
channel has faulted.
• Sec Status – Shows the status of the Secondary A, B and C channels, and the ganged channel
(if present and enabled in the Gang menu). The OK indicator will report a failure when any one
channel has faulted.
• Pri – Lights green when the Primary inputs are feeding the output. Select this switch control to
select the Primary as the output.
• Auto – Lights green when Auto is turned on. Switch Auto on and off with this switch control.
When Auto is on, the module will automatically switch to the Secondary input if the Primary
fails and the Secondary is good.
• Sec – Lights red when the Secondary inputs are feeding the output. Select this switch control
to select the Secondary as the output.
• Auto Reset – Set to On or Off to determine if the switch will automatically switch back from
Secondary to the Primary channel after it recovers.
• Reset Time – Set the amount of time the Primary signals must be good before the Auto Reset
switches back to Primary from Secondary.