Ensemble Designs 5470 Digital Processing Amplifier and Legalizer - Manual (Page 24)

The Status menu shown below gives the read-only status of the following:
• Input – indicates if the serial input signal is being equalized and the serial
receiver is locking to it.
• Audio – indicates if embedded audio is detected in the input data stream.
• Option – indicates whether the 5475 DNR submodule option is installed.
• EDH Error – indicates No Error if proper EDH is present, No EDH if EDH is
not present, and No Input if there is no serial input present. When an EDH error
is detected, it will be indicted by a specific EDH error code.
• Error Seconds – displays the number of seconds that a detected EDH error has
been present in the serial data stream.
Model 5470 Digital Proc Amp and Model 5475 DNR
5470/5475-24