Ensemble Designs 5470 Digital Processing Amplifier and Legalizer User Manual
Page 17
The Blanking menu allows you to select the blanking mode desired for the output with
the following:
•
Mode – set the blanking mode to either Wide (content in the vertical interval is
blanked) or Narrow (content of the vertical interval is passed).
•
V Bit Pos – in 525 mode only. Set the position of the vertical bit in the 601 output
to Line 10, Line 20 or Line 23.
The Memory menu allows you to save overall module setups into up to five memory
registers as follows:
•
Select Save, then one of the five memory registers Reg 1 – 5. The box will turn
green. The entire module setup is now saved in the selected register.
•
To recall a register, select the register box. If there is information saved, the box
will turn green. The saved setup will now be loaded to the module. Up to five
different module setups can be saved and recalled using the individual registers.
Model 5470 Digital Proc Amp and Model 5475 DNR
5470/5475-17