Eneo VHM/ECLKA-W - Manual (Page 18)

8
V Installation and connection of
the NE-112 power supply unit
See enclosed instructions for installation of the NE- power supply unit series. On the EC housing model, the
incoming 30V mains cable is to be connected directly to the provided connections; on the ST housing model, con-
nection is made using the cable adapter supplied with the NE- series.
VI Options / Accessories
The optional accessories currently available can be found on our Homepage: www.videor.com
VII Closing the housing
Attention must be paid when closing the housing that the sealing rings are left in correct position and no wiring is
caught between the housing and cover edges.
VIII Maintenance instructions
The main rubber gaskets should be replaced after opening the housing for maintenance purposes to ensure
protection class IP66.