Eneo EDC-4222B - Manual (Page 8)

• Optional Tinted Bubble, Indoor & Outdoor pendant housing with heater & blower, Indoor Flush
mount, Parapet mount & Roof Top mount.
Figure 1 – Typical System Configuration
push
push
remove camera window
remove window
assemble bubble ring ass'y
bubble ring ass'y
screw
Figure 2 –Assemble bubble ring ass’y (Optional)
Note : It is recommended to remove camera window for improving picture quality when
you use bubble ring ass’y.
CAUTION : When installing a Fastrax camera on a high pole outside, caution should be
taken to avoid vibration and shaking of dome camera due to windload or
shock of passing heavy vehicles. If pole is not stable enough, it may cause
malfunction in accurate tilt positioning.
2