Eneo EDC-4222B - Manual (Page 48)

3.13 OSD Setup
Display
ON / OFF
All display or title will disappear when DOME OSD DISPLAY sets OFF
Trace ON / OFF
Choose to enable or disable Trace. (Only Detection Mode)
Bounding Box ON / OFF
Choose to enable or disable Bounding Box.
Blending ON / OFF
Choose to enable or disable Alpha Blending.
Time/Date ON / OFF
Choose to enable or disable Time and Date display.
Preset Title CONSTANT / OFF / 3, 30, 60,120,180 second
Set the preset title display time.
Line Color White / Black / Red / Green / Blue / Yellow / Violet / Orange
Set the ROI color.
View A-Title ON / OFF
Choose to enable or disable Area-Title display.
AF/AE ON / OFF
Choose to enable or disable AE/AF display
View Direction ON / OFF
“ON” sets current direction as N(north) and the coordinate angle to 000.
“OFF” hides the directional title. Every 90 degrees of clockwise rotation
will change the title to E(East), S(South), W(West). If using the
ON/OFF option frequently, it is recommended that you set “North” as a
Preset. Recall the “North” Preset before enabling the directional title.
Cam Title up to 6 characters.
Area Title Enter a specific name on programmed angle between START and
END. For the screen below, when the camera points at an angle
between 124.3
° (PAN), 30.7° (TILT) to 359.5° (PAN), 45.4° (TILT),
Title will be displayed on the screen.
42