Eneo EDC-4222B - Manual (Page 13)

2.4 Fail-safe Network
When you control the dome by the other device not own keyboard, some error may be existed in
the serial communication. The reason is caused by the other device without the fail-safe network.
At this time, you solve the problem to set this DIP switch to ON of the nearest dome from the
other device only.
SW1
o
n
SW1 SW1-3 SW1-4
ON PULL-UP PULL-DOWN
OFF NONE NONE
Figure 8 – Setting Dome Camera Termination
Figure 9- Termination Diagram
7