Eneo PLS-5304 - Manual (Page 27)

27
WebGuard is a program that allows you to view and search video from remote locations over the Internet and can be
accessed on a
Microsoft Internet Explorer.
System requirements for running WebGuard are as follows:
• OS: Microsoft ® Windows ® XP (Service Pack 3), Microsoft ® Windows ® Vista (Service Pack 1), Microsoft ® Windows ® 7
(Home Premium, Professional, Ultimate), Microsoft ® Windows ® 8 (Pro, Enterprise)
• CPU: Intel Pentium IV 2.4GHz or above (Core 2 Duo E4600 recommended)
• RAM: 1GB or more
• VGA: 128MB or more (1280x1024, 24bpp or above)
• Internet Explorer: Version 8.0 or later 32-bit
Currently no other web browsers are supportet!
1
Launch Internet Explorer and then enter the following information in the address bar.
– http://IP Address:Port Number (WebGuard connection port number selected during video encoder IP address
and port number setup)
– Or http://FEN Server Address/FEN name (FEN Server address and FEN name registered to the FEN Server)
• If the Use HTTPS option has been selected during WebGuard port number setup, enter https instead of http. If prompted
with a security certificate warning, select "Continue to this website (not recommended)." If the WebGuard login page fails
to load, configure Internet Explorer's settings as follows:
– Tools → Internet Options → Security → Custom Level... → Medium-high (default) or Medium.
– Tools → Internet Options → Advanced → Security → Use TLS 1.0 (select)
• If connecting by entering an IP address and a port number, you can connect by entering just the IP address if WebGuard
connection port number has been set to 80 (443 when entering https).
• Contact your network administrator for the IP address of the video encoder you wish to connect to the the WebGuard port
number.
2
When prompted with the WebGuard login window, enter the ID and password and click LOGIN.
Part 3 - WebGuard