Eneo PLS-5304 - Manual (Page 16)

16
Configure basic video encoder settings and all other
system settings.
Screen images may vary depending on the model.
Remote Setup
1
Launch the INIT program and then from the main
screen, select a video encoder whose settings you
wish to change.
2
Click on the Setup icon.
3
Select Remote Setup from the Setup menu to load
the Remote Setup screen. Alternatively, you can
select Video Encoder from the main screen and
then right-click to access the Remote Setup screen.
• System settings can also be changed using a remote
program.
• Remote Setup over the Internet supports a
Microsoft Internet Explorer 10 only.
From the Remote Setup screen, select the
menu on the left to display the current settings.
Select an option under the menu to change the
corresponding settings. Once you have changed
the settings, click OK to apply the settings and exit
from the Remote Setup screen.
Quick Setup
Quick Setup allows you to set up System, Network,
Video, Audio, and other basic settings needed for video
encoder use.
Part 2 - Remote Setup