Eneo PLS-5304 - Manual (Page 19)

Part 2 - Remote Setup
19
Network
Change the network settings, enable FEN and security
features.
IP Address
• Type: Select the type of network you are using. If
this option has been changed, Remote Setup will
terminate after applying the current settings.
- Manual: Select if using a static IP. You will then be
able to configure the related settings manually.
- DHCP: Select if connected to the network using
DHCP. Click OK to retrieve IP address and other
network settings automatically from the DHCP
server.
• DNS Server: Enter the DNS server's IP address. By
using the DNS server, you will be able to use domain
names instead of IP addresses when configuring the
FEN, time, or SMTP server. If the video encoder is
connected to the network via DHCP, select the From
DHCP option to retrieve the DNS server's IP address
from the DHCP server automatically. The updated
address will be displayed upon the subsequent
connection.
• Contact your network administrator for more
information on the video encoder's network
connection type, the DNS server's IP address, and
other related information.
• If using DHCP, the video encoder's IP address may
change from time to time. We therefore recommend
that you use the FEN feature.
FEN
Select Use FEN to enable the FEN feature.
• FEN Server: Enter the FEN Server's IP address or
domain name.
• Port: Enter the FEN Server's port number.
• FEN Name: Enter a video encoder name you wish
to register to the FEN Server. Click OK to check the
name's availability.