Features and functions, Front view – ARM Electronics Casino VCR800 User Manual

Page 6

FEATURES AND FUNCTIONS

English-6

1. POWER LED

When Power ON, LED Light

2. EJECT button

Press to remove the cassette.

3. PAUSE/STILL SEARCH button

When pressed during recording, tape
movement stops temporarily. Press REC
button to continue the recording.
When pressed during playback, tape
movement stops.
Press again to advance by still picture.
Press to TIMER/DATE SEARCH in stop
Mode.

4. REW button

Press to Rewind in stop Mode.

5. PLAY/REC CHECK button

Press to playback a previously recorded
tape. Press this button during recording to
confirm the recording operation.
It playbacks the recording on screen for
seconds and returns to recording mode.

6. FF button

Press to Fast Forward wind in stop Mode,
to Fast Forward view in playback.

7. STOP button

Press to discontinue all tape related
functions. After finished TIMER Record
SET up, press button 2 Seconds more
than to activate TIMER program.

8. REC(RECORD) button

Press to begin recording.

9. TAPE END LED

When tape Remain Less than 6minite on
the 8H Mode, LED light.

10. LED Display

11. MENU/MENU EXIT button

Press to display current state on Monitor
screen, You can change its contents.
Press to undisplay Menu screen.

12. MOVE(

▼)/TRACKING(-) button

Press to move the cursor down on menu
screen or to operate tracking during
playback / slow. To move the location of
time OSD

13. ENTER(

▶)/TRACKING(+) button

Press to select the cursor to change the
value to set or to operate tracking(+)
during playback / slow.

14. SPEED(-) button

Press to select in good order like *L40H,
L24H, L8H during playback and stop mode

15. CLEAR/Speed(+) button

Press to delete the information stored on
screen display as Alarm recall, Power fail
and Timer program. Press to select in
good order like *L8H, L24H, L40H during
recording / playback and stop mode

16. OSD ON/OFF switch

Move to Display on / off.

17. MENU Reset

Press to OSD data initialize.

18. All Reset

Press to system initialize.

FRONT VIEW

*NTSC model: L40H, L24H, L8H...

PAL model: L27H, L15H, L3H...

NOTE

8 9