ARM Electronics Casino VCR800 - Manual (Page 27)

English-27
ADJUSTMENT
TRACKING ADJUSTMENT
If noise appears in the picture during playback, slow playback, adjust the TRACKING buttons
to achieve the best picture.
When the tape is ejected the tracking is set to the initial setting.
VERTICAL ADJUSTMENT (Correcting picture vibration at the top and bottom)
When watching still playback, the picture may vibrate. In this case, press the V.LOCK œ or √
button to reduce or eliminate the picture vibration.
1. Capture a still picture by pressing the PAUSE / STILL button in playback or special
playback.
2. Press the V.LOCK œ or √ button to reduce or eliminate the picture vibration.
* Noise bars will move through the
picture each time the TRACKING
button is pressed
NOTE
* Horizontal vibration cannot be
corrected with V.LOCK œ or √
buttons.
NOTE
TRACKING -, + BUTTON
TRACKING -, + BUTTON