Setting the clock ( initial clock setting ), Setting the menus, Date format – ARM Electronics Casino VCR800 User Manual
Page 12
SETTING THE CLOCK ( INITIAL CLOCK SETTING )
English-12
setting the menus
MENU OPERATION
1. Press MENU button.
2. Press MOVE to shift the cursor (
) downward.
3. Press ENTER to select or adjust the default value, and when having a following
informative page, it enters into the next mode.
4. Press SPEED(-) or SPEED(+) to adjust the cursor value.
5. Press MENU to exit the OSD mode.
When the VCR is turned on for the first time or after exhaustion of the battery, initial clock set
up is needed. Without inputting the clock data, the time to be recorded on the recorded
pictures will not match with the time of the incidents. Therefore make sure that you fill out
correctly before exiting menu.
By pressing ENTER key, date format change like following order.
MM/DD/YY
DD/MM/YY
DATE FORMAT
*You can amend the data by using
speed -/+ keys when the above menu
appears and the record and playback
speed will not be changed at that time.
NOTE
[ CLOCK SET UP ]
▶
DATE FORMAT
MMDDYY
DATE MM/DD/YY
DAY
TIME HH:MM:SS
DAY LIGHT
OFF
IN
03/2nd-SUN
02:00
OUT 11/1st-SUN
02:00
DISPLAY
LOWER-R
[
▼
] [
▶
]
[MENU] END