ARAG BRAVO DSB - Manual (Page 3)

1 Product descriPtion
Bravo DSB is an electronic instrument for simulation and demonstration / diagnostics for the Bravo
computer family. Thanks to this apparatus it is possible to simulate working of the Bravo computerised
system, connecting it directly to the spraying computer, or to carry out a demonstration of the
system’s working. Connecting Bravo DSB to a spraying system already in use, it is possible to carry
out diagnosis of the system to check for any problems before starting up.
1.1 Intended Use
This device has been designed for the inspection and diagnostics of systems and parts
already installed or to be installed on agricultural machinery.
The device is designed and manufactured to comply with the requirements of
directive 2004/108/EC and subsequent modifications.
1.2 Connectable Devices
“T” cabling (supplied) allows the connection of the following devices, up to 5 sections:
Bravo 110, Bravo 120, Bravo 180, Bravo 300S.
For different models, order the dedicated cable as shown on Tab. 1.
• Cables to be ordered separately:
coMPuter /
Monitor
Bravo 110 Bravo 120
Bravo 300S
Direct connection
Bravo 300S
RCU
Bravo 400 RCU
cABLe code 467003.101 467003.101 467003.103 467003.104 467003.104
connectABLe
ModeLs
467110 467120 46730701 46732XX1 * 46742XX1 **
467110A 46731701 46733XX1 * 46747XX1 **
Tab. 1
* Up to 7 sections (excluding the sequential version)
** Excluding the sequential version
3