Amped Wireless AD14EX - 14dBi Directional Outdoor Wi-Fi Antenna Kit User Manual

Page 2

Amped Wireless

A Division of Newo Corporation

Amped Wireless, Newo Corporation, the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.

Mounting Instructions

Pole Mounting:

Antenna Operating Tips:

Two High Power Antennas are better than One:

To get the most out of your High Power Wireless Antenna, it is always recom-

mended that you use multiple antennas (one on each side of your connection).

High Power Wireless Antennas increase the transmit power of your wireless device

by concentrating the wireless signal from your wireless device. In order to

achieve optimal range, it is recommended that a high gain antenna is used on

each end of your wireless connection.

High Power Amped Wireless WiFi devices also help to increase the overall range of

your wireless application. Amped Wireless High Power Wireless products include

power amplifiers that boost both receiving and transmitting strength.

The Amped Wireless (A division of Newo Corporation, Inc.) Limited Warranty

Warranty Period: The Amped Wireless Limited Warranty is for one (1) year from the date of purchase for new products. Refurbished products carry the Limited Warranty for thirty (30) days after the date of purchase.

Guarantee: Amped Wireless warrants to the original purchaser that the hardware of this Amped Wireless product shall be free of defects in design, assembly, material, or workmanship.

Conditions: The Amped Wireless Limited Warranty is for repair or replacement only at the sole discretion of Amped Wireless. Amped Wireless does not issue any refunds for purchased product. In the event that Amped Wireless is unable to repair or replace a product (i.e. discontinued product), Amped Wireless

will offer a credit toward the purchase of a similar product of equal or lesser value direct from Amped Wireless. Any repaired or replacement products will be warranted for the remainder of the original Warranty Period or thirty (30) days, whichever is longer. Amped Wireless reserves the right to discontinue any

of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued product. Amped Wireless reserves the right to revise or make changes to this product, its documentation, packaging, specifications, hardware, and software without notice. If any portion of the Amped

Wireless Limited Warranty is found to be unenforceable, its remaining provisions shall remain in effect. All costs of shipping the product to Amped Wireless shall be borne solely by the purchaser.

Limitations: IN NO EVENT SHALL AMPED WIRELESS’ (NEWO CORPORATION’S) LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, ACCESSORIES OR ITS

DOCUMENTATION. The Amped Wireless Limited Warranty does not apply if: (a) the product assembly has been opened or damaged, (b) the product or its software or firmware has been altered or modified, (c) the product has not been used and installed in accordance to Amped Wireless’ instructions, (d) the

product has been subjected to misuse, or negligence. Amped Wireless does not guarantee the continued availability of a third party’s service for which this product’s use or operation may require. The Amped Wireless Limited Warranty does not protect against acts of God, vandalism, theft, normal wear and tear,

obsolescence and environmental damages such as, but not limited to, weather and electrical disturbances. The Amped Wireless Limited Warranty is the sole warranty for this product. There are no other warranties, expressed or, except required by law, implied, including the implied warranty or condition of

quality, performance merchantability, or fitness for any particular purpose.

How to Claim Warranty Service:

In the event that you have a problem with your Amped Wireless product:

1) Check the Amped Wireless website for support for your product: www.ampedwireless.com/support/
2) If you cannot find a solution for your product issue, call the Amped Wireless Technical Support department to help troubleshoot your issue:

Toll Free: 888-573-8820

Local: 909-992-3209 x 4

3) If the Amped Wireless support agent cannot solve your problem, the support agent will check to make sure your product is eligible for warranty service. A product is eligible for warranty service under the following conditions:

a. Your product was purchased within 1 year from your service request

b. Your product is registered with Amped Wireless

c. You have product serial number available

d. You have the proof of purchase for your product

4) The support agent will then provide you with a “Ticket” number and access to the RMA website to fill out a form for warranty service
5) Send the form back to the agent and you will be provided an RMA number along with instructions on how to ship your product back to Amped Wireless for service. You will be responsible for properly packing and shipping the product at your cost to Amped Wireless. Be sure to include all accessories,

cables and power adapters.

6) Amped Wireless will service your product and determine whether a replacement or repair is needed for your product issue.
7) After the service is complete, your product will be shipped back to you (Amped Wireless has the right to determine the bearer of cost related to shipping product back to the customer).

Technical Support:

The Amped Wireless Limited Warranty is not related to the terms, conditions and policies of Amped Wireless’ Technical Support offerings. For questions regarding support, please contact [email protected]

Product Warranty and Regulatory Information

Downlink

Tx Strong Transmit Signals

Rx Strong Receive Signals

Not Optimized Wireless Signals

One Antenna = Not Optimized

Bridge

Access Point

Signal Pattern

Omni-Directional Coverage

Side View

30°

Top View

Downlink

Tx Strong Transmit Signals

Rx Strong Receive Signals

Access Point

Bridge

Two Antenna = Good Connection

Correct Installation

Incorrect Installation

Optimal Antenna Coverage

30°

Antenna Positioning:

High Power Antennas have antenna gain levels that are much higher than standard

wireless antennas. By concentrating the wireless signal, High Power Antennas

modify the signal pattern of your wireless device. It is important that you under-

stand the wireless output pattern of your High Power Antenna (right) so you may

carefully position it to your desired output location. If you feel that you are not

getting the wireless range and performance from the antenna, you may need to

adjust the position of your antenna until the desired performance is achieved.

Check the signal strength of your setup using the user interface of your WiFi

device or through a 3rd party WiFi network analyzer software.

Wall Mounting:

Pole

Wall

1 Antenna x1
2 L Bracket (1) x1
3 M5 Washer x 4
4

M5 Nut x4

M6 Nut x4

M6 Split Lock Washer x 4

Wall Screw x 4

Wall Anchor x 4

10
11 L Bracket (2) x 1
12 M6 Washer x4
13 M6 Bolt x4

M5 Split Lock Washer x 4

M6 Washer x 4

3
4

1 Antenna x 1
2 M5 Washer x 4
3

M5 Nut x 4

M6 U-bolt x 2

5
6

M6 Split Lock Washer x 4

M6 Nut x 4

L Bracket x 1

M6 Washer x 4

Link x 2

M5 Split Lock Washer x 4

Instructions and parts needed