Alinco DJ-V57 - Manual (Page 53)

9.Cloning and Packet Operation
9
53
9. Cloning and Packet Operation
The memory data and customized operational parameters can be transferred from a
Master unit to other DJ-V57 (Slave units).
9.1.1 Cable Connection
• Make sure that both units are turned off before connecting the cable.
• Connect the Microphone/Speaker jack on the Master unit with the Slave unit using
an optional clone cable (EDS-11) as shown below, then turn on both units.
9.1.2 Master/Slave Units
Press the PTT key three times while holding down
the MONI key.
"CLONE" is displayed on the LCD.
NOTE:
This operation is required also to program the data using utility software.
To the MIC/SP jack on the Master unit
* Be sure to securely screw the plug all the way down to the bottom of the jack.
To the MIC/SP jack on the Slave unit
Cloning 9.1