Alinco DJ-V57 - Manual (Page 45)

8.Set Mode
8
45
8. Set Mode
The Set mode is used to customize the various operational parameters of your DJ-V57.
This chart shows the available parameters in the Set mode.
1. Press the FUNC key for at least 2 seconds.
The unit enters the Set mode.
"BS-1" is displayed as a factory-default.
2. Press the MONI key or FUNC key to select a menu.
The Monitor function can't be used in this status.
3. Rotate the dial to change the parameter.
4. Press any key other than the MONI key and FUNC key to complete the settings.
The last operated menu will be selected the next time you enter the Set mode.
Entering the Set Mode 8.2
Menu Default setting Function
01 BS-1 Battery save
02 TIMER1 Scan setting
03 BEP-ON Beep sound
04 VOD-OF VOX delay time setting
05 APO-OF Auto power off
06 NORMAL FM/NFM setting
07 ATT-OF Attenuator setting
08 SFT-OF CPU clock frequency shift
09 BCL-OF Busy channel lock out
10 1750 Tone burst frequency
11 T-OFF Time out timer setting
12 TP-OFF TOT penalty setting
13 DWT-01 DTMF wait time setting
14 DF-60 DTMF first digit burst time setting
15 DB-60 DTMF burst time setting
16 DP-60 DTMF pause time setting
17 STB-OF Stand by beep
18 MID-05 MID power setting
MONI key
FUNC key
Set Mode Operation 8.1