Alinco DJ-V57 - Manual (Page 14)

2.Accessories
2
14
2. Accessories
2.1.1 Antenna
Attaching the Antenna
1. Hold the antenna by its base.
2. Align the grooves at the base of the antenna with
the protrusions on the antenna connector.
3. Slide the antenna down and turn it clockwise until
it stops.
4. Confirm that the antenna is securely connected.
Removing the Antenna
Turn the antenna counter-clockwise to disconnect the antenna.
2.1.2 Hand Strap
Attach the hand strap as shown. There are two ways
to attach it.
2.1.3 Belt Clip
Attaching the Belt Clip
1. Put the belt clip on the back of the unit, and turn
the screw clockwise until it stops.
2. Confirm that the belt clip is securely attached.
* Tighten up the screw occasionally.
Removing the Belt Clip
Turn the screw counter-clockwise to remove the belt clip.
■
Belt clip
■
Hand strap
■
■
Installations 2.1