Alinco DJ-V57 - Manual (Page 40)

6.Selective Calling
6
40
The DTMF tones can be stored in the memory to automatically transmit.
6.4.1 Setting the Auto Dialer
• All 16 DTMF tones up to 16 characters are available for each of 9 memories and "M
st" memory called an Auto Dialer memory.
Programming the Auto Dialer Memories
1. Press the FUNC key, and while is displayed on the LCD, press the key to
enter the Dialer Setting mode. The "M1" appears.
There are six space available for characters on the display, and nothing is displayed initially.
2. Select a desired Auto Dialer memory channel from M1 to M9 and Mst by rotating
the dial.
• The "Mst" memory is explained on page 51 "STB-DT"
3. Use the DTMF key to input the DTMF tones.
For example: when programming 123456789, the display changes as follows:
[ 1] –> [ 12] –> [ 123] –> [ 1234] –> [ 12345] –> [123456] –> [234567] –>
[345678] –> [456789]
• To set a pause instead of a tone, press the FUNC key, and while is displayed ,
press the key. "-" is displayed for a pause.
The pausing time is approx. 1 second.
• Press the FUNC key, and while is displayed, rotate the dial to scroll the display
to see the hidden characters.
• To clear the programming, press the FUNC key, and while is displayed, press the key.
4. Press the PTT key to complete the programming.
6.4.2 Generating the Auto Dialer Codes
Please program the Auto Dialer memory channel(s) in advance.
1. Press the FUNC key, and press the key. "DIAL" is displayed on the LCD.
2. Press one of the to key (corresponding to memory #1~#9) to
automatically generate the DTMF tones.
Auto Dialer Operation While Transmitting
1. While pressing the PTT key, press the FUNC key. "DIAL" is displayed on the
LCD. Don't release the PTT to proceed.
2. Press one of the to or key to automatically transmit the DTMF
tones stored in memories.
■
■
Auto Dialer 6.4