EverFocus Day / Night Speed Dome Camera EPTZ 100 User Manual
Page 29
EPTZ100_ma_en_rev03.doc
29
ZOOM POS INIT
Defines a zoom position after powering up the camera,
range is x1 ~ x10
LENS INIT
Reset of the autofocus lens in case of malfunction
END
Return to CAMERA ADVANCED SETTING page
EXPOSURE BRIGHTNESS
Image brightness setting, range 1~100
IRIS
Mode of the lens iris:
AUTO:
automatic iris mode
MANUAL:
manual iris operation
SHUTTER
Electronic
exposure
control
ESC: Electronic auto shutter, the shutter speed is
automatically
adapted
to
light
conditions
NOTE: This mode item is only available for setup
if IRIS mode is set to "MANUAL"
MANUAL: Manual setup of shutter speed
A.FLK: Flickerless mode. Useful in sceneries with light
sources
powered
with
a
frequency
different
from
the
camera
AGC
Automatic Gain Control, gains video signal under low light
conditions.
HIGH: AGC ON, high gain
NORMAL: AGC ON, normal gain
OFF: AGC off (SSNR and SENS-UP are not available in
this mode)
SSNR
Signal noise reduction. This feature improves the signal-
noise ratio under low-light conditions.
OFF: no noise reduction
LOW, MID, HIGH: level of noise reduction
NOTE: this feature requires setting AGC: NORMAL or
HIGH
SENS-UP
The SENS-UP function increases the light sensitivity by
interpolation
of
several
images.
AUTO: SENS-UP function active. Enter the submenu to
enter the number of maximum interpolated
pictures
(2
~
128)
NOTE: Please consider that a higher value
creates brighter pictures, but due to the
longer
calculation
time
moving
objects
may appear distorted in the picture.
(effect similar to longer exposure time at
photo
cameras)
OFF: no SENS-UP function
NOTE: this feature requires setting AGC: NORMAL or
HIGH
END
Return to CAMERA ADVANCED SETTING page