EverFocus Day / Night Speed Dome Camera EPTZ 100 - Manual (Page 26)

EPTZ100_ma_en_rev03.doc
26
4.1.3 Main menu
After opening OSD setup the MAIN menu is shown at the screen:
MAIN MENU
SYSTEM INFO
DISPLAY
CAMERA
SCAN
CONTROL
PRIVACY MASK
ALARM
INITIALIZE
EXIT
Select a menu item with UP/DOWN, RIGHT will open submenu.
NOTE: The OSD menu has a timeout function. After 2 minutes with no activity, the OSD menu will close
automatically.
4.1.4 System info
This menu shows the camera type, firmware version and communication settings.
There are no editable items in this menu.
SYSTEM INFO
TYPE EPTZ100
FIRMWARE 709M809Q
BAUD RATE 9600
RS-485 ID 1
PROTOCOL EVERFOCUS
4.1.5 Display
The settings in this menu define the overlay displays of the camera.
CAMERA ID Shows the RS-485 ID on the screen:
ON: display of RS-485 ID
OFF: no display of RS-485 ID
CAMERA NAME With setting ON, a camera title with up to 16 characters can be entered.
ON: display of camera title (with option for edit)
OFF: no title display
PRESET NUMBER ON: display number of active preset
OFF: no preset number display
PRESET NAME ON: display of a freely editable title (up to 16 characters) of the preset
(available for presets 1 ~ 32)
OFF: no display of preset name
PTZ POSITION ON: show coordinates for pan and tilt in degrees and zoom ratio
OFF: no PTZ position display
RETURN Returns to main menu