Alinco DJ-175 - Manual (Page 39)

6.Selective Calling
6
39
3. Use the DTMF key to input the DTMF tones.
For example: when programming 123456789, the display changes as follows:
[ 1] –> [ 12] –> [ 123] –> [ 1234] –> [ 12345] –> [123456] –> [234567] –>
[345678] –> [456789]
• To set a pause instead of a tone, press the FUNC key, and while is displayed ,
press the key. "-" is displayed for a pause.
The pausing time is approx. 1 second.
• Press the FUNC key, and while is displayed, rotate the dial to scroll the display
to see the hidden characters.
• To clear the programming, press the FUNC key, and while is displayed, press the
key.
4. Press the PTT key to complete the programming.
6.4.2 Generating the Auto Dialer Codes
Please program the Auto Dialer memory channel(s) in advance.
1. Press the key. "DIAL" is displayed on the LCD.
2. Press one of the to key (corresponding to memory #1~#9) to
automatically generate the DTMF tones.
Auto Dialer Operation While Transmitting
1. While pressing the PTT key, press the FUNC key. "DIAL" is displayed on the
LCD. Don't release the PTT to proceed.
2. Press one of the to key to automatically transmit the DTMF tones.
6.4.3 Redial
This function generates the last DTMF tones used by the unit.
1. Press the key while the unit is receiving.
2. Press the key. The last DTMF tones (either the auto dialer code or a
manually input DTMF code) is automatically generated from the speaker. The unit
doesn't transmit the tones in this operation.
3. To transmit, press the FUNC key while pressing the PTT key, then the key.
Please note that you must operate the DTMF tones at least once to proceed above.
■