Alinco DJ-175 - Manual (Page 14)

2.Accessories
2
14
2. Accessories
2.1.1 Antenna
Attaching the Antenna
1. Hold the antenna by its base.
2. Align the grooves at the base of the antenna with
the protrusions on the antenna connector.
3. Slide the antenna down and turn it clockwise until it stops.
4. Confirm that the antenna is securely connected.
Removing the Antenna
Turn the antenna counter-clockwise to disconnect.
2.1.2 Hand Strap
Attach the hand strap to the belt clip as shown in the
illustration.
Hand strap
Belt clip
■
NOTE:
This antenna has been designed very flexible. It
is softer than conventional ones but not a defect.
■
Installations 2.1