Alinco DJ-175 - Manual (Page 32)

5.Useful Functions
5
32
In the Memory mode, it is possible to display up to 6 alphanumeric characters (Name-
tag) instead of conventional frequency display.
5.4.1 Setting Name-Tag
1. Select the memory channel.
2. Press the FUNC key, and while is displayed press the key.
3. [A ] flashes on the display.
4. Rotate the dial to select a character to be the first digit.
5. Press the key to input the next character. The previous character will stop
flashing.
6. Repeat the same sequence as necessary.
Press the key during setting to delete all characters.
7. Press any key (except MONI, , ) to complete the setting.
5.4.2 Using the Channel Name Function
• Programmed memory channels are displayed with alphanumeric characters. The
channel number is displayed as it normally is.
• Press the FUNC key to display the frequency display for 5 seconds. Pressing certain
keys during this 5 sec period may immediately recall the alphanumeric display,
while other keys access their allocated functions.
Naming Memory Channels 5.4