Airmar PM260—Pocket or Keel-Mount - Manual (Page 4)

IMPORTANT
Some printers and print settings may alter the size
of this template. Before cutting, verify the template’s
size by placing the transducer on top of the
template. If necessary, redraw the template to the
exact size of the transducer. Verify the placement of
the holes by checking the dimensions.
11mm or 7/16”
11mm or 7/16”
35mm
or 1-3/8”
8mm
or 5/16”
PM260, PM265LH, PM265LM
PM270W, PM275LH-W