Airlink WLC010 - Manual (Page 43)

11Mbps Wireless LAN PC Card User's Manual
Setting Power Save Mod e
Power Save Mode is recommended for devices where power consumption is a major concern,
such as battery-powered devices. While in Power Save Mode the Access Point stores
incoming messages in a memory buffer. The Wireless LAN Card wakes up periodically from
Power Save Mode and checks for any messages that might be waiting at the Access Point.
After the messages are transmitted to the Wireless LAN Card from the Access Point, the
Wireless LAN Card goes back into Power Save Mode.
1. In the taskbar, click the Wireless LAN Link Status icon to display the Wireless LAN
Configuration Utility dialog box.
2. Click the Configuration tab.
3. In the PS Mode (Power Save Mode) list, click Enabled, and then click Apply Changes.
4. Click OK to exit the utility
38
You may need to minimize
all other Windows programs
that are currently running.