Airlink AME001 User Manual
Page 39
Chapter 5 Command Reference
37
S25 serves two purposes. When the modem is operating in synchronous mode 1, the value assigned to S25
specifies the length of time the modem waits after a connection has been made before examining DTR. This
allows the modem to ignore an ON-to-OFF transition of DTR, giving the user time to disconnect the modem
from the asynchronous terminal and attach it to a synchronous terminal, without forcing the modem back to the
asynchronous command mode. During this time, the value for S25 is read in whole seconds.
Range: 0 - 255 (0.01 second)
S26
RTS to CTS Delay Interval
Pertains to synchronous operation only. When CTS tracks RTS (&R0) and the modem detects an ON-to-OFF
transition on RTS, this register sets the time delay before the modem turns CTS to ON.
Range:
0 - 255 hundredths of a second
S29
Bit Mapped Options
Bit Value Description
bit0-4
(n)
AT*I (n)
bit 5,6,7 000 AT&U0
001 AT&U1
010 AT&U2
S30
Inactivity Disconnect Timer
This register determines the length of time, in seconds, the modem waits before disconnecting when no data is
sent or received. This function is only applicable to buffer mode.
Range:
0 - 255 tenths of a second
S95
Bit-Mapped Options
Bit Value Description
bit 0,1 0 0 W0.
0 1
W1.
1 0
W2.
1 1
W3.
Bit 2 0
\V0.
1
\V1.
Bit 3 0
N0.
1
N1.
Bit 4-7 (n)
*On.
S97
Bit-Mapped Options
Bit Value Description
bit 0,1,2 000 \N0.
001 \N1.
010 \N2.
011 \N3.
010 \N4.
011 \N5.
110 \N6.
111 \N7.
Bit 7 0
%C0.
1
%C1.
S98
Bit-Mapped Options
Bit Value Description