Ericsson DIALOG 4422 - Manual (Page 85)

85 Dialog 4422 IP Office
Settings
Change ring signal for a Monitoring key
The Monitoring keys are programmed by your system
administrator, however you can change the type of ring signal from
your phone. See also section “ Key Monitoring ” on page 73.
Change the type of ring signal
Settings
Ô
Press.
The
Function Keys menu or the Programmable Keys menu is
framed.
Â
Press.
Ô
Press the Monitoring key to program.
The extension number of the phone that is monitored is shown
together with the current type of ring signal for the key.
ì
Press (+) to change.
ì
Press to change between the ring signals.
• Silence.
• Periodic (repetitive) ring signal.
• Delayed periodic ring signal.
• One muted ring signal. Only one ring signal with a low level.
• One muted delayed ring signal.
Note: The Clear key can be used to leave the menu without
saving the changes. Â
Press to store the framed ring signal.
í
Press to return to the previous menu,
or
Settings
Х Ф
press to return to idle mode.
Monitored number: 3223
Periodic
Silence
Periodic