Ericsson DIALOG 4422 - Manual (Page 29)

29 Dialog 4422 IP Office
Incoming Calls
Incoming Calls
Answer calls
A ring signal and a flashing lamp indicate an incoming call.
Note: If the feature Parallel Ringing is activated, the call will
ring on more than one phone, see section “ Parallel Ringing ”
on page 32 .
On Line 1
Normally you will receive calls on Line 1. u
Lift the handset.
On Line 2 or Monitoring key u
Lift the handset.
Ц Ф
Line 2 Press the flashing Line 2 key,
If you have an ongoing call (Line 1), the first call is put on hold.
or Ц Ф
Jim Press the flashing Monitoring key.
If you have an ongoing call (Line 1), the first call is put on hold.
Notes:
If a tone is heard, wait for the tone to stop before starting
the conversation.
You can change the ring signal for the Monitoring key, see
section “ Change ring signal for a Monitoring key ” on
page 85 .