AEC AG Auger Series Granulator - Manual (Page 27)

6.5” Granulators Chapter 5: Maintenance 26 of 35
Figure 7: Recommended Knife Replacement Blades
D2 Material Physical Material Quality
High Shear 50º
ABS (High Imp’t) Energy Impt X
ABS (Med. Imp’t) Energy Impt X
ABS (Low Imp’t) Energy Impt X
Acetal Energy Impt X
Acrylic Energy Impt X
Nylon (non-filled) Energy Absb X
Nylon (filled) Friable N/A N/A
Polybutylene Energy Absb X
PET (Bottles) Energy Impt X
PET (Preform) Energy Impt X
Polyethylene (PE. Low) Energy Absb X
Polyethylene (PE. Med.) Energy Absb X
Polyethylene (PE. High) Energy Absb X
E.V.A. Energy Absb X
Polypropylene (P.P.) Energy Absb X
Polypropylen Oxide
(P.V.D.C) Energy Absb X
Styrene (G.P.) Friable X
Styrene (M ID) Friable X
Styrene (HI) Energy Impt X
Polysulfone (GLS. REIN) Friable X
P.V.C. (Rigid) Energy Impt X
P.V.C. (Flex) Energy Absb X
Phenolic Friable N/A N/A
TPR Energy Absb X