AEC AG Auger Series Granulator - Manual (Page 10)

6.5” Granulators Chapter 2: Functional Description 9 of 35
Chapter 2: Functional Description
2-1 Models Covered in This Manual
This manual provides the necessary instructions for the installation, set-up, and maintenance
of our auger-fed granulators.
2-2 General Description
The auger-fed granulator is a gravity-loaded, auger-hopper-fed, medium-duty, plastic
material cutting unit. The granulator is fully portable and automatic, with a small footprint. It
is designed for continuous, medium-duty applications, such as runners, sprues, blow-molded
scrap, small thin wall parts, and pre-cut thermoformed web.