AEC OL Series Blender - Manual (Page 18)

Page 17 of 20
Downloading and Uploading to the Panel View
Step 3: If the existing Panel View already is running software (customer’s site), then
you will first need to upload and save this to a directory of your choice. That way if you
have any problems with the new software then you will be able to download the old
software back into the unit. If you are only changing the Panel View software and not the
SLC 500 software then you do not have to right down all of the “Setup” parameters for
the blender. These parameters will automatically be loaded into the panel view from the
SLC 500 once you have completed the download. To upload the existing software from
the panel view to your laptop first run “Panel Builder/Panel Builder”. Do not run the
“Application file Transfer Utility!!!!”. Once Panel Builder is running go to “Application”
and select “Upload”. When the upload is complete save the file onto the laptop into the
directory of your choice. Typically label it “Onsite “date”” and name the folder the
customer’s name. After this is done you will be ready to download the new software to
the panel view.
Step 4: Close any files that are currently open in panel builder and then open the
new software file (“4_comp.pba” or “8_comp.pba”, that is found under “PLC Projects/AB-
OL Software/Standard”). WHENEVER PROMPTED SELECT “REPLACE ALL” AND “ADD
ALL”. Once the file is open then go under “Applications” and select “Download”. Follow
the Instructions. When this is complete the Panel View will reboot automatically and
should come up in normal operation mode. This completes the uploading and
downloading of Panel View Software.