AEC Self Cleaning Continuous Filters - Manual (Page 31)

Self Cleaning Continuous Filter Chapter 4: Operation 30
Figure 16: Collector Process Air Flow
4-3 Shutting Down the Collector
Dust Control and Pneumatic Conveying Systems
1. Turn off the main fan.
2. Wait five to ten minutes and turn off the timer and discharge (auxiliary) equipment.
3. Turn off the compressed air.
Process System
1. Dryers and the system to the collector discharge should be run until empty and heat
maintained at a reduced rate until the collector metal surfaces and filter bags are dry.
2. Perform steps 1 through 3 listed above in the Dust Control and Pneumatic Conveying
System section.