AEC Self Cleaning Continuous Filters - Manual (Page 19)

Self Cleaning Continuous Filter Chapter 3: Installation 18
4. Lift the main housing section, rotate the outlet to the proper orientation with respect
to the outer ductwork, set the bottom flange of the housing in place on the top flange
of the hopper, and bolt the two flanges together (See Figure 5 below). Apply two
beads of furnished caulking to the top flange on the housing in the same manner as
step number 3.
Figure 5: Assembling Main Housing Sections
Note: Drawing may not depict current unit. Contact manufacturer’s
engineering department for current drawings.