AEC AP Series Large Dehumidifying Dryer - Manual (Page 43)

Large Dehumidifying Dryers Controls 42
4-6 AP1+ Data Monitoring and Navigation
Overview Displays
There may be up to 4 overview displays depending on the number of drying hoppers in the
system. Each overview display shows, by color, the status of the drying hoppers and of the
dryer.
Each drying hopper shows its current supply air temperature value and the dryer shows the
current dew point value.
• Press and release a drying hopper to enable or disable it. Press and hold a drying
hopper for 3 seconds to switch to that drying hoppers detailed status display.
• Press and hold the dryer for 3 seconds to switch to a detailed dryer status display.
• Press the “Push to Start” button to start the dryer.
• Press the “Push to Stop” button to stop the dryer.
• Press the “Shutting Down Push to Restart” button to re-start the dryer.
• Press the “Process Fault Push to Restart” button to re-start the dryer after a failure of
the process system.
• Press the “Regen Fault Push to Restart” button to re-start the dryer after a failure of
the regeneration system.
• Press the “Main” button to access the main menu display.
• Press the “Alarms” button to access the alarm history display.
• Press the “Help” button to access the help menu display.