beautypg.com

Waterproof solution with conduit, Installation guide, 9waterproof solution with conduit – ACTi Outdoor Hemispheric / Fisheye Dome on Straight Wall with Tilted Mount User Manual

Page 9

background image

www.acti.com

Installation Guide

9

Waterproof Solution with Conduit

This section describes the procedures to waterproof the cabling connections using a flexible

conduit with 3/8” trade size (not supplied). This is the recommended solution when connecting an

external power adaptor, audio in/out, or digital input/output (DI/DO) devices to the camera.

1.

Disassemble the cable gland as shown below:

2.

Pull the Ethernet cable and other cables (if any) through the flex conduit.

NOTE:

To connect an external power adaptor, audio in/out, or digital input/output (DI/DO)

devices, insert the cables without connectors through the flex conduit together with the

Ethernet cable at this point.

3.

Insert the clamping nut through the flex conduit.

Lock Nut

Body

(with Washer)

Sealing
Rubber

Clamping

Nut